Guard Wash

A High-Performance Cleaner for Porous Surfaces

Guard Wash is a high-performance cleaner formulated to remove organic staining and common surface contamination from porous building materials. It effectively tackles mould, mildew, algae, moss, tannins, leaf marks, pollution, greasy stains and other moisture-related soiling that can build up on exposed surfaces.

Fast Deep Cleaning Action

Guard Wash is designed for simple, efficient application. Apply the product directly to the affected surface and allow it to work—no rinsing is normally required. For surfaces where residue needs to be removed, Guard Wash can be rinsed approximately 24 hours after application.

The product can also be left on the surface to provide a residual cleaning effect.

Its powerful formula penetrates deep into the surface to break down stubborn organic build-up without damaging the material underneath. Ideal for both residential and commercial applications, Guard Wash delivers professional-grade cleaning results with minimal effort.

Guard Wash can be used on renders, walls, roofs, floors, paving, concrete, stone, tiles and other exterior materials, making it a versatile solution for ongoing maintenance and restoration projects.

Gentle on Porous Building Materials

Guard Wash is free from potash, hydrochloric acid and phosphoric acid. Unlike harsh acidic or corrosive cleaning products, it is designed to clean without damaging suitable treated surfaces or altering their colour.

This makes Guard Wash a versatile choice for cleaning and maintaining porous materials including concrete, natural stone, artificial stone and terracotta.

Key Benefits

• Removes mould, algae, lichen and organic stains
• Restores surfaces to a clean, like-new appearance
• Suitable for walls, roofs, floors and render
• Fast-acting and easy to apply
• Helps maintain and extend surface appearance  

Ideal for Green and Black Staining

Porous surfaces exposed to moisture and the elements can develop unsightly green, black or brown staining over time. Guard Wash is specifically designed to address organic contamination such as mould, mildew, algae, moss and tannins, helping restore the appearance of weathered surfaces.

For long-lasting protection after cleaning, we recommend applying a suitable Guard Industry sealer to help protect the surface against future staining, moisture and environmental contamination.

Bring Surfaces Back to Life

Whether you’re cleaning exterior walls, revitalising roofs or restoring paving, Guard Wash delivers powerful results you can see.

Simple to apply by sprayer or brush, Guard Wash works quickly to lift dirt and contamination from surfaces. Depending on the level of soiling, results continue to improve after application as the product keeps working over time.

Application

• • Guard Wash is ready to use, do not dilute.
  • Always test on the material before application.
  • Spray onto a dry or slightly damp material.

Recommendation:

• • Light soiling: 1 coat 
  • Moderate soiling: 2 coats, 1 hr apart
  • Heavy soiling: 3 coats, 1 hr apart
  • On vertical surfaces, always apply from bottom to top.
  • Rinsing is not required, but removes the last residue.  If rinsing, wait 24 hours and use a high-pressure cleaner.
  • Before repainting or applying a protective product, the material must be completely rinsed off and dry (refer to the finishing product data sheet).

Uses

Guard Wash is suitable for a wide range of exterior surfaces affected by organic staining and weather-related contamination, including:

• • • Roofs and roof tiles
    • Walls and rendered surfaces
    • Balconies and awnings
    • Paving and garden stones
    • Fences, decks and outdoor furniture
    • Monuments and garden ornaments
    • Tennis courts
    • Landscaping and other porous building materials

Guard Wash can also be used to help restore weathered timber fencing and outdoor furniture.

Indicative Coverage

• • approx 6m²/L
  • ​Coverage will vary depending on the porosity of the surface.

Tools Required

• • Low pressure garden sprayer